KER 40 ONE-DESIGN RACER SPECIFICATION

Click Here for Pricing and Options PDF

 GENERAL SPECIFICATIONS
LOA 12.20 M
Beam

 4.15 M
Draft 2.60 M
Disp.

 4,850 Kg
Fresh Water Capacity

 70.00 Ltr
Fuel Capacity

 40.00 Ltr
Engine Power

 30.00 Hp
ISO Structural

 CAT.A  
ISO OSR

 CAT.1  

 SAIL PLAN 
P> 16.40 M
E

 5.54 M
I

 16.02 M
J

 4.84 M
SPA

 170 M Sq
STL 6.75 M

DECK HARDWARE

• Full Harken Deck gear package
 • 2 x Primary Winches Harken B50.2 PTA
 • 2 x Pit Winches Harken B46.2 STA
 • 2 x Main Sheet Winches Harken B 46.2 STA
 • 2 x Backstay Winches Harken B 35.2 STA
 • 7 x Spinlock Clutches along with custom organizers
• McConaghy autoclaved glass aerofoil Stanchions & Pulpit
• McConaghy autoclaved glass single leg Pushpit
• Stainless steel 1/19 wire lifelines. 
 • 4 x Clear dinghy hatches in cockpit sides for rope stowage 

RIG

• Hall Spars Carbon 2 Spreader Rig (Split as option)
• 2 x Sets Hall Spars carbon spreaders 
• Nitronic 50 standing rigging
• Wire turnbuckle deck ties
• Kevlar backstay
• Hall Spars Carbon Boom 
• 2 reef lines (single clutch)
• Hall Spars quick vang
• Harken Carbo foil head foil 

RUNNING RIGGING

• 2:1 Mainsail halyard
 • 1 x Fractional Jib halyard
 • 1 x fractional Spin / jib halyard
 • 2 x Masthead spinnaker halyards
 • 1 x Mainsheet
 • 2 x Spin sheets
 • 2 x Jib sheets Traveler with purchase
 • Main Cunningham with purchase
 • Outhaul purchase in boom
 • 2 x Reeflines
 • Vang purchase
 • Jib car in haul adjuster with purchase
 • Jib lead up down adjuster with purchase
 • 2 x Spinnaker tack lines
• 2 x Topmast Backstay Tails
• 1 x Bob Stay

ENGINE

• 30 hp Yanmar diesel engine with Sail Drive
• Folding 2 bladed prop
• Spinlock flush throttle control 
• 40 Liter rigid plastic fuel tank (60 liter optional)

ELECTRICAL

• Red/white cabin lighting in saloon, galley, heads and navigation areas
• 12 volt DC switch panelBattery isolator/selection switch
• 2 x House Batteries, 
• 1 x Engine Battery
• Navigation Lights Pulpit, Pushpit mounted

PLUMBING

• Freshwater Hand pump at galley sink
• Lightweight head
• 2 Manual bilge pumps
• 2 x 50 liter fresh water bladder tank

STEERING SYSTEM

• Autoclaved prepreg carbon rudder stock

• Corecell foam cored, carbon skin rudder blade

• Autoclaved Carbon Fibre Tiller + Spinlock Tiller extension

• JP3 Upper and Lower self-aligning rudder bearings

INTERIOR

• Navigation station 
• Galley: 2 x sinks & 2 x burner stove
• Head located fwd of mast bulkhead
• 4 x pipe cots
• Engine box with integrated bottom steps

EXTERIOR & INTERIOR FINISH

• Awl Grip paint finish to top sides and deck gloss areas
• Paint finish Non-skid areas on deck
• Cockpit Floor: Non-skid grip tape 
• Below water line Finished with Epoxy primer
• Interior: Living area satin white, other areas light weight peel ply racing finish